Mechatronics Concentration Program
Overview / نظرة عامة
This interdisciplinary program equips students with skills in sensors, actuators, microcontrollers, and signal conditioning, alongside essential software knowledge. Students gain hands-on experience building mechatronics systems, preparing them for the demands of Industry 4.0, including IoT and robotics. This concentration aligns with Saudi Arabia’s Vision 2030 goals, where mechatronics expertise is key to advancements in automation, healthcare, and smart city infrastructure.
هذا البرنامج يجمع عدة تخصصات ويعلّم الطلاب مهارات مهمة مثل أجهزة الاستشعار، والمشغلات، ووحدات التحكم الصغيرة، ومعالجة الإشارات، إلى جانب الأساسيات في البرمجة. الطلاب يكتسبون خبرة عملية في بناء أنظمة ميكاترونكس، مما يجهزهم لمتطلبات الثورة الصناعية الرابعة، مثل إنترنت الأشياء والروبوتات. هذا التخصص يتماشى مع رؤية السعودية 2030، حيث أن أمتلاك خبرة في تخصص الميكاترونكس أصبح ضروريًا في تطور مجالات الأتمتة، والرعاية الصحية، والبنية التحتية للمدن الذكية.
Application for the Concentration Program
Eligibility Criteria
Requirements:
- Minimum GPA of 2.0 is required for all BSc KFUPM students.
- Students with applied major cannot enroll in concentrations.
- Students who completed (79 – 115 hours).
- Students who finished all junior-level courses of the specific majors are eligible to enroll in the concentration after completing the prerequisites.
Timeline:
- Applications open at the end of the first semester of the Junior year ( around November ) till the middle of the following semester ( around February).
- Applications are reviewed at the end of the second semester or early summer.
Hosting Department:
- Mechanical Engineering
For more information about concentration programs, visit the general information page.
To apply for the concentration program, please visit the official application page provided by the university.
Offered To:
| Major | Pre/Co-requisites | Notes |
|---|---|---|
| Mechanical Engineering (ME) | Co: EE 234 | Must be taken concurrently if not completed |
| Electrical Engineering (EE) | Co: EE 203 | Must be taken concurrently if not completed |
| Computer Engineering (COE) | Co: EE 236 | Must be taken concurrently if not completed |
| Aerospace Engineering (AE) | Any of EE 234, EE 203, or EE 236 | Choose one of the listed courses |
Courses in the Concentration
| Course | Course Title | Brief Description | Pre-requisites | Instructors | Average GPA | Notes |
|---|---|---|---|---|---|---|
| COE 450 | Introduction to Smart Systems | Covers sensors, actuators, embedded systems, and power management. | EE 203, or EE 234, or EE 236 | Dr. Luai AlAwami | ||
| EE 436 | Introduction to Micro and Nanoelectronics | Basics of microfabrication, CMOS technology, and MEMS. | EE 203, or EE 234, or EE 236 | Dr. Jhonathan Rojas | ||
| CIE 445 | Control of Mechatronic Systems | Principles of mechatronic control, digital design, and MATLAB applications. | Senior Standing | Dr. Nezar AlYazidi | ||
| ME 455 | Mechatronics Design | Advanced mechatronics design with a focus on integration and control for a project. | Senior Standing | Dr. Ammar AlZaydi | 3.44 (Term 222) | The course relies on a project from the student’s own choice. |
| Semester | Course 1 | Course 2 |
|---|---|---|
| First Semester (Fall) | COE 450 | ME 455 |
| Second Semester (Spring) | CIE 445 | EE 436 |
Special Benefits
-
Hands-on Experience: Gain practical skills in system design and control.
-
Industry Relevance: Prepares students for roles in automation, IoT, and smart technologies, aligned with Vision 2030.
-
Additional Courses/ Short Courses/ Professional Certifications Taken or Obtained Through the Program:
-
Expos/ Conferences/ Competitions for individuals involved in the program:
-
Softwares and Applications Utilized: Arduino, Matlab
-
Other Benefits:
Resources
- For courses’ study materials click here
Instructors
| Photo | Name | Courses | Office Number | Telephone | Office Hours | Department | Specialization | Taqeem Post | Coordinator | |
|---|---|---|---|---|---|---|---|---|---|---|
| Prof. Muhammad Hawwa | ME 443 & ME 444 (Both courses are not part of the CX but are related) | Building 63 Room 311 | drmafh@kfupm.edu.sa | 966-13-860 4659 | Weekdays after 3 PM on Teams | Mechanical Engineering | Sensing and Actuation | Taqeem Post |  Program Coordinator |
|
| Dr. Ammar AlZaydi | ME 455 | Building 63 Room 242 | ammar.alzaydi@kfupm.edu.sa | 966-13-860 1953 | Everyday 2-4 PM | Mechanical Engineering | Robotics and Automation | Taqeem Post | ||
| Dr. Nezar AlYazidi | CIE 445 | Building 22 Room 233 | nalyazidi@kfupm.edu.sa | 966-13-860 1484 | - | Control and Instrumentation Engineering | Control Systems | Taqeem Post | ||
| Dr. Jhonathan Rojas | EE 436 | Building 59 Room 1069 | jprojas@kfupm.edu.sa | 966-13-860 8867 | - | Electrical Engineering | Electronics | Taqeem Post | ||
| Dr. Louai Al-Awami | COE 450 | Building 22 Room 202 | louai@kfupm.edu.sa | 966-13-860 1948 | - | Computer Engineering | Smart and Embedded Systems | Taqeem Post |
Miscellaneous Information
-
Number of Students in a Single Batch: On Average 10 Students
-
Information about Previous Batches:
First batch started the program in Term 241 and will complete it in Term 242. -
Former/Current Students in the Program Contact Information:
-
Interested Companies/ Organizations:
شاركنا تجربتك مع التخصص عبر الإجابة على الأسئلة التالية:
هل ترى أن ما تعلمته في هذا التخصص يتماشى مع أهدافك المهنية؟:
your text
من برأيك يستفيد من دراسة هذا التخصص؟:
your text
ما الأمور التي تمنيت أن يغطيها التخصص أو يتم تقديمها بطريقة مختلفة (مثل المنهج، المواضيع، الاختبارات، المشاريع)؟:
your text
إذا كنت قد تخرجت، هل حصلت على وظيفة بمجال يتعلق بالتخصص المذكور؟ (مع ذكر جهة التوظيف إذا أمكن).
Your text
وبإمكانك ذكر نقاط إضافية :
your text